Crew in hi-vis spraying shotcrete onto a tall retaining wall fitted with steel anchor heads
Retaining walls · Basements · Slopes · Finishes

Shotcrete services in Melbourne, sprayed strong and fast.

Sprayed concrete for retaining walls, basement walls, cut banks and feature finishes across Melbourne. Our crew sprays straight onto steel reinforcement with far less formwork, built to AS 3600.

Get your free shotcrete quote

A few quick questions. We call back within one business day.

No obligation. We never share your details.

What does your wall or slope need?

Shotcrete goes where formwork is slow or awkward: cut banks, basement walls, curved shapes. Tell us what you are holding back or building and we will work out the mix and steel, or just send us the plans.

Worker in a hard hat and hi-vis spraying shotcrete onto a wall of steel reinforcing mesh

Retaining walls

Reinforced walls sprayed straight onto steel mesh, without the full formwork of a poured wall.

Best for: cut sites, split-level blocksQuote a retaining wall →
Worker in a white hard hat spraying shotcrete onto a reinforced wall, with another worker beside him

Basement walls

Sprayed walls between piles and capping beams, forming strong linings for basements.

Best for: basements, underground garagesQuote a basement wall →
Worker in blue overalls and a hard hat spraying shotcrete over steel mesh on an earth slope

Slope stabilisation

Sprayed over mesh on cut banks and embankments to hold the ground and stop erosion.

Best for: sloping blocks, cut banksQuote slope work →
Worker in an orange hoodie and hard hat spraying concrete beside a reinforcement cage and a dark wall

Feature finishes

Curved, sculpted and textured concrete for landscaping, feature walls and facades.

Best for: landscaping, feature wallsQuote a feature wall →

From plans to a sprayed wall in four steps

Start with step 1
STEP 1

Send your plans

Send us the drawings and engineering, or just tell us the suburb and the wall you need. No plans yet? We can still give a budget range.

Takes 2 minutes
STEP 2

Site visit and fixed quote

We check access, hose runs, levels and ground conditions on site, then send a written quote listing prep, steel and spraying.

Within 1 business day of the visit
STEP 3

Prep and spray

Ground trimmed and steel mesh fixed and checked, then shotcrete sprayed in layers and compacted hard against the reinforcement.

Spray dates set in your quote
STEP 4

Handover and paperwork

Surface finished, site cleaned and concrete dockets handed over, so your builder or the next trade can carry straight on.

Next-trade date at handover

Got your plans ready? Send them over and we'll take it from there.

You'll have a clear, itemised shotcrete quote back within one business day, with no surprises later.

Why builders call Urban Pour for shotcrete

Sprayed concrete is only as good as the crew on the nozzle. We spray it ourselves, so one team answers for the mix, the steel and the finish.

Worker in hi-vis spraying shotcrete onto a steel reinforcement mesh wall at a construction site

High-pressure spraying gear

High-pressure spraying systems drive the concrete into the steel, for strong adhesion and good compaction.

Less formwork, faster walls

Spraying straight onto mesh skips most of the formwork, so walls go up faster than a traditional poured wall.

Built to AS 3600

Mix, cover, curing and inspections done by the book, with concrete dockets handed over when the job is finished.

Priced to your job

Structural walls or feature finishes, each job is quoted to the drawings and your budget, line by line.

Questions people ask before they book shotcrete

Straight answers. If yours is not here, call and ask.

Call 0433 189 316 →
How much does shotcrete cost in Melbourne?

The price depends on wall height, thickness, steel, access and finish. Send plans and you get a fixed figure, not a guess.

Shotcrete or a poured wall, which do I need?

Shotcrete suits cut banks, curved shapes and walls hard against the ground, where formwork is slow. Poured walls suit straight, free-standing runs. Your engineer's drawings decide.

Is shotcrete as strong as poured concrete?

Yes, when it is sprayed right. High-pressure spraying compacts the concrete into the steel for strong adhesion, and the mix is made to your engineer's specification.

Do you fix the steel and finish the surface too?

Yes. Steel mesh, spraying and the finished surface are all our crew, from plain structural walls to textured feature finishes. One quote covers the lot.

Which areas of Melbourne do you cover?

We are based in Preston and work across the northern, eastern, western and south-eastern suburbs and the inner city.

Ready to spray? Get your shotcrete priced this week.

A few questions, one callback, one free quote. Urban Pour sprays retaining walls, basement walls and feature finishes across Melbourne.